Eaton DS-206S series Instructions Manual page 9

Instructions for Low Voltage Power
Circuit Breakers Types DS and DSL
This instruction book is expressly intended to cover the installation, operation and maintenance
of Low Voltage Power Circuit Breakers, Types DS and DSL.
For application information, consult your nearest Eaton sales office, see Eaton
Descriptive Bulletin 32-850, or appropriate ANSI Standards.
NOTE: This manual covers both Pre and Post 1988 versions of DS and DSL Low Voltage Power
Circuit Breakers. The two main differences are the front cover and the trip unit (Amptector
vs. Digitrip RMS) - see IL8700C39 supplied with the breaker for the Digitrip RMS trip unit details.
Except for the front cover and trip unit, all other sections in this manual apply to current production.
All Safety Codes, Safety Standards and/or Regulations as they may be applied to this type of
equipment must be strictly adhered to.
All possible contingencies which may arise during installation, operation, or maintenance, and all details and variations of this equipment do not
purport to be covered by these instructions. If further information is desired by purchaser regarding his particular installation, operation or
maintenance of his equipment, the local Eaton representative should be contacted.
PURPOSE
SAFETY
Instruction Booklet IB 33-790-1J
Effective November 2010
EaToN CorPoraTIoN www.eaton.com
vii