Mounting On A Wall - SMC Networks WAP5110 Quick Start Manual

Quick Start Guide
2. Mount the AP
1
After planning your installation, mount the unit on a wall or suspended ceiling
T-rail.
1

Mounting on a Wall

.
1
Set two screws in the wall 6.2 mm (2.4 in.) apart.
2
Slide the AP's wall mounting slots down onto the screws so that the unit is secure.
Mounting on a Ceiling T-rail
.
1
Position the AP's ceiling-mount clip holders on either side of the T-rail.
2
Turn the AP until the two clips lock the AP to the T-rail.
2
2
– 2 –