Specifications - Victron energy BlueSolar MPPT 150/60 Manual

5. Specifications

BlueSolar charge controller
Battery voltage
Maximum battery current
Maximum PV power, 12V 1a,b)
Maximum PV power, 24V 1a,b)
Maximum PV power, 48V 1a,b)
Maximum PV open circuit voltage
Peak efficiency
Self consumption
Charge voltage 'absorption'
Charge voltage 'equalization'
Charge voltage 'float'
Charge algorithm
T emperature compensation
Protection
Operating temperature
Humidity
Maximum altitude
Environmental condition
Pollution degree
Data communication port and
remote on/off
Synchronized parallel operation
Colour
PV terminals 2)
Battery terminals
Protection category
Weight
Dimensions (h x w x d)
Safety
1a) If more PV power is connected, the controller will limit input power to the maximum power.
1b) PV voltage must exceed Vbat + 5V for the controller to start.
T hereafter minimum PV voltage is Vbat + 1V.
2) MC4 models: several splitter pairs will be needed to parallel the strings of solar panels
MPPT 150/45
12/24/48 V Auto Select (36 V: manual)
45 A
650 W
1300 W
2600 W
Less than 35 mA @ 12 V / 20 mA @ 48 V
Default setting: 14,4 V / 28,8 V / 57,6 V
Default setting: 16,2 V / 32,4 V / 64,8 V
Default setting: 13,8 V / 27,6 V / 55,2 V
multi-stage adaptive
(eight preprogrammed algorithms)
-16 mV/°C / -32 mV/°C / -64 mV/°C
Battery reverse polarity (fuse, not user accessible)
Output short circuit / Over temperature
-30 to +60°C (full rated output up to 40°C)
95 %, non-condensing
Indoor, unconditioned
See the data communication white paper on our website
Not possible
ENCLOSURE
Blue (RAL 5012)
35 mm² / AWG2 (T r models),
or dual MC4 connectors (MC4 models)
35 mm² / AWG2
IP43 (electronic components)
IP 22 (connection area)
200 x 250 x 95 mm
ST ANDARDS
EN/IEC 62109
MPPT 150/60
60 A
860 W 1000 W
1720 W 2000 W
3440 W 4000 W
150 V
98 %
(adjustable)
(adjustable)
(adjustable)
2000m
PD3
VE.Direct
3 kg
MPPT
150/70
70 A
11