Important Safety Information; Safety Alert Symbol - Greenlee 709 Instruction Manual

IMPORTANT SAFETY INFORMATION

This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for
preventing or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this warning could
result in severe injury or death.
Greenlee / A Textron Company
SAFETY
ALERT
SYMBOL
KEEP THIS MANUAL
709 and 710 Stud Punches
Electric shock hazard:
This is not an insulated tool. Contact
with live circuits could result in severe
injury or death.
Wear eye protection when using
this tool.
Failure to wear eye protection could
result in serious eye injury from flying
debris.
Do not add extensions (cheaters) to the handles.
Using excessive force may result in injury or damage
to the tool. If excessive force is required to complete
a punch, verify that the type and thickness of material
do not exceed the capacity of the tool.
• Inspect the tool prior to use. Replace worn,
damaged or missing components with Greenlee
replacement parts. A damaged or improperly
assembled tool may break.
• Use this tool for manufacturer's intended use only.
Use other than that which is described in this
manual may result in injury or damage to the tool.
Do not use on heavier than 20 gauge mild steel.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
2
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070