G2090/03560 Adjustable Cable Stripping Tool Keep this manual available to all personnel. All specifications are nominal and may change as design improvements occur. Greenlee Textron Inc. shall not be liable for damages resulting from misapplication or misuse of its products. KEEP THIS MANUAL Greenlee / A Textron Company 1.800.561.8187...
Capacity ........... 8 AWG to 750 kcmil Keep the tool clean and dry. No additional maintenance or cable with an outside diameter of is required. 3/16" to 1-1/4" (4.7 mm to 31.7 mm) Greenlee / A Textron Company 1.800.561.8187 information@itm.com www. .com...
Page 4
Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Failure to observe this warning could result in severe injury or death. Greenlee / A Textron Company 1.800.561.8187 information@itm.com www. .com...
Spiral Cutting Direction 6. Remove the cable stripping tool from the cable. 7. Use the lifting edge (7) at the end of the spiral cut to peel the insulation jacket off the conductor. Greenlee / A Textron Company 1.800.561.8187 information@itm.com www.
G. Reinstall the blade depth adjusting knob, but keep the blade tip concealed for protection. H. Reinstall the blade housing on the handle (4) until both latches snap tight against the handle. Greenlee / A Textron Company 1.800.561.8187 information@itm.com www.
Need help?
Do you have a question about the G2090/03560 and is the answer not in the manual?
Questions and answers