Elite Screens Pop-Up Cinema Series User Manual

Indoor/outdoor portable pop-up projection screen

Hide thumbs Also See for Pop-Up Cinema Series:

Pop-Up Cinema Series

Indoor/Outdoor Portable Pop-up Projection Screen

User's Guide

Thank you for choosing the Pop-Up Cinema portable projection screen! Please read through this user

guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.

Parts List

A. Carrying Bag x1

B. Screen x1

C. Net Base x1

D. Support Bar x2

E. Stake x4

Note: The parts list above is subject to change without notice.

1) Take out the screen and net base from the

2) Connect the Screen to the net base.

carrying bag and expand them.

Projection Screen

Net Base

Velcro Connection

070114-ESA

www.elitescreens.com

Table of Contents

Do you have a question about the Pop-Up Cinema Series and is the answer not in the manual?

Page 1 Pop-Up Cinema Series Indoor/Outdoor Portable Pop-up Projection Screen User’s Guide Thank you for choosing the Pop-Up Cinema portable projection screen! Please read through this user guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.
Page 2 3) Insert the support bar behind the screen and then 4) Ground the net base with the stakes. connect the rod sections so that it is at maximum length. Support Screen Stake Stake Connector Support Bar Net Base Disassembling the screen 1) Step on the back end of the screen and bring 2) While holding the material down with both feet, middle part of screen or net base towards you...
Page 3 5) Continue to bring the material down and remove 6) Repeat the above process with the net base to your left foot. Push the screen down and continue ensure it will also fit in the carrying bag. to hold it in the compressed position. You should now be able to insert it into the bag.