Launch ROXIE W User Manual page 17

LAUNCH
*Note: Once you saved the information, it will be automatically generated each
time the diagnostic report is saved. The workshop information will be appended as
a personalized "tag" on the reports. If you choose to skip this step, you may set it in
"Settings" -> "Account Information" later.
6. Bind ROXIE W to a compatible diagnostic scanner : If you had purchased a
diagnostic scanner of LAUNCH family, you can associate the ROXIE W
device with it so that all diagnostic reports generated by ROXIE W can be
viewed on the scanner. Otherwise, just tap "Next" to skip this step.
7. User agreement : Carefully read all terms and conditions of the user agreement,
check the box before the "Agree to all the above terms", and tap "Complete"
finish the sign-up process and go to "Congratulation" page.
8. Finish registration : Tap "Begin" on the congratulation page to start checking for
updates.
9. Check for updates : If a newer software version is detected, the system will
automatically start downloading (*Note: Download and installation time depends
on the internet connection) . After downloading is finished, ROXIE W navigates
to the Job Menu.
*Note: Updating to the latest diagnostic software can help ROXIE W obtain more
accurate test results. It is recommended to check for updates on a regular basis to
keep current with the latest available software.
4.3 Job Menu
It mainly includes the following function modules.
To view all reports generated by ROXIE W.
*Note: In general, ROXIE W only saves all diagnostic reports for one
year from the date the report was created.
Report
If the device is associated with (bound to) a diagnostic scanner
of LAUNCH family, the reports will be synchronized and
appended to the Reports list of the scanner.
To make some system settings, including Wi-Fi setup,
Email address for receiving diagnostic reports, Workshop
Settings
information, Associate device, Diagnostic software update,
Expiration date and System version check etc.
ROXIE W
User Manual
13