Launch ROXIE W User Manual page 16

LAUNCH
address, and tap "Next" to go to next step.
*Notes:
• You are strongly recommended to fill in a valid email address. After you configured
it, the system will automatically send the diagnostic report to your email box every
time a complete Auto-Detect process is successfully finished.
• The email address filled in process of sign-up is the default email for receiving all
the diagnostic reports generated by the devices which are bound to this email
address.
• To assign an email address to receive reports from certain device, go to ROXIE-
AIT management platform -> "Set Email". For detailed operations, please refer to
Chapter 7.4.2.
5. Fill in workshop information : Type in the workshop name and address, and tap
"Next" to go to the next step.
12
Set-up Email
After ROXIE is properly connected to the
network and inspection is completed, the
reports will be sent to the following email
address. Carefully enter email address below
(if you enter multiple email addresses, use ";"
to split). If the email address is to be changed
in the future, you may do so in Settings.
Please input the email address
Previous
Figure 4-4
ROXIE W
100%
Next
User Manual