Dorel Juvenile Group Scenera Instructions Manual page 17

4358-5405 Can Scenera 12/8/10
3.
1
2
4.
5
4
3
31
2:50 PM Page 33
Thread Harness Strap
NOTE: Make sure sewn end of
the harness strap loop faces
the buckle before starting.
Thread the harness strap
down through harness slot on
left side of shell (1) and up
through harness slot on right
side (2).
Take both ends of the
harness strap and make
them even in length.
NOTE: Make sure harness
adjustment strap is between
the harness strap and shell
as shown. Do Not twist
harness straps.
Thread left harness strap
through left buckle tongue
and right harness strap
through right buckle tongue.
Make sure to push through
from the back of buckle
tongue (3). Thread the chest
clip from front to back as
shown (4). Do Not twist
harness straps.
Push left harness strap
through left upper harness
slot and right harness strap
through right upper harness
slot at the same height (5).
5.
Attach Harness Straps
to Splitter Plate
Fit harness strap loops
onto splitter plate on the
back of the restraint
system. Make sure they
are completely on and
not twisted.
NOTE:
end of the harness strap
loops faces towards you.
You must install the harness system properly.
Failure to follow these warnings can result in
serious injury or death.
32
Make sure sewn