Dorel Juvenile Group Scenera Instructions Manual page 10

4358-5405 Can Scenera 12/8/10
7.
a.
b.
c.
17
2:50 PM Page 19
To Change Harness
Strap Location
With harness system
loosened, from the back,
unhook harness strap loops
from the splitter plate.
From the front of restraint
system, pull harness straps
out of the upper harness
slots.
Rethread harness straps
into new upper harness slot
location.
NOTE: DO NOT twist the
harness straps.
From the back of the
restraint system, hook the
harness straps loops onto
the splitter plate.
NOTE: DO NOT twist
harness adjustment strap.
Make sure the harness
straps are COMPLETELY
ON the splitter plate.
Do not use this infant restraint rear-
facing if the top of your infant's head
is above the top of the infant
restraint.
Do not use this child restraint
forward-facing if the midpoint of your
child's ears are above the top of the
child restraint.
Make sure the harness height is correct for
your child's size. Verify frequently.
Failure to reinstall harness straps correctly
could result in serious injury or death.
Incorrect use of the harness system is the
most common mistake people make. It is very
important to read, understand and follow all
instructions and warnings.
Failure to follow these steps can result in
serious injury or death.
18