Assembling The Mixing Bowl; Dismantling The Mixing Bowl - Cuisinart BFP603E Instructions Manual

B. Assembling the Mixing Bowl
handle of the bowl with the other. Screw the bowl
onto the base by turning in a clockwise direction.
You will hear a click when the bowl is properly locked
onto the processor base.
Note: the bowl can be fitted onto the motor housing in
4 different positions. The handle can face left or right,
depending on your preferences.
emulsion disc as indicated below:
1. The chopping disc
The blade should be easy to press into the bottom of
the bowl and should almost touch the bottom.
CAUTION, THE BLADE IS VERY SHARP. Always hold the
blade by its central hub.
2. The reversible disc
bowl.
CAUTION: hold the disc by the central plastic hub to
prevent the risk of injury.
To slice: the sliding blade must face upward.
To grate: the grating slits must face up.
3. The emulsion disc
the bowl
direction until it is in place. A click indicates that it is
properly locked onto the lid.
side facing the outside of the bowl.
ready to use.
C. Dismantling the mixing bowl
hand, turn the lid in an anticlockwise direction.
emulsion disc (and adapter) from the bowl.
and the handle of the bowl with your other hand.
Turn the bowl in an anticlockwise direction and lift
the bowl from the base.
29