E- P1- 4. "DEMO MODE":
Spin down the
switch
to the page 1
E- P2- 1. "POWER SAVE" SETTING: Example set the "Power Save Enable".
While the power save mode, the LCD remote transceiver uses "0" current to save the battery power.
Spin down the
switch
to the page 2
E- P2- 2. "PARKING METER" SETTING: Example set the "Parking Meter 30 min..
Note: When "parking meter" trigger presses any button to stop the beeper.
Spin down the
switch
to the page 2
D - P2- 3. "PARKING AREA" SETTING: Example set the "Parking Area." to "B120
Spin down the
switch
to the page 2
Press the button 1 and
-
the "
" flashes for
setting.
Press the button 4 to
start Demo movie
Press the button 1 and it
will display previously
setting.
Press the button 2
Press the button 3, it will
display previously
parking area
Spin down the
switch
to set the "1"
Demo movie playing
Press the button 1 to
change the setting.
Press the button 1 three
times to set the parking
timer to 30 minutes.
Press the button 2 to
clear the parking area,
-
and the "
" flashes for
setting.
Press the button 1 and
-
the "
" flashes for
setting.
8
Press the any Button to
exit.
Press the
button and
the setting is done.
Press the
button to
start the parking meter
and the
icon will
flash on the main page.
Spin up the
switch to
setting the "B"
Spin down the
switch to set the "2".
Need help?
Do you have a question about the SRT-9000 and is the answer not in the manual?
Questions and answers