Main Page - Code Alarm SRT-9000 Owner's Manual

Power by built-in 3.7V lithium polymer battery, if the OLED screen
display low battery or
transceiver. While the battery of the Remote Transceiver is under
the battery charging, you can push the " " button to check
charging condition.
Charge Input
USB Input
While the battery of
the Remote
Transceiver is under
charging.
C. MAIN PAGE:
1. Press the button, the screen will display main page.
2. While the icon flashing on the OLED screen, press the
detail of the flash icon, the display sequence of flash icon as follows: TRIGGERED / ENGINE
RUNNING / COUNT DOWN TIMER / TIMER START / ALART TIMER condition.
While the
TRIGGERED icon
flash.
While the icon flash
is flash, charge your remote
Optional AC Power Supply
If you have optional AC POWER SUPPLY / AC ADAPTOR (Output
Voltage: 4.2VDC – 5.5VDC and with same USB plug), then you can charge
the battery indoors.
Push the button; the
screen will display
Battery charging.
Push the
button to display
triggered area.
Push the button
button, the OLED screen will display the
5
.