P1-1: Enable / Disable Bi Sound While Pressing Button; P1-2: Button Lock Setting; P1-3: Melody / Vibration Mode - Code Alarm SRT-9000 Owner's Manual

Spin down the switch
to the page 1
Spin down the switch
to the page 5
E- P1- 1. "BUTTON BEEP" SETTING: Example: Set the "Button Beep Disable".
It has a short "bi" sound while pressing the button of the remote transceiver
Spin down the switch
to the page 1
E- P1- 2. "BUTTON LOCK" SETTING: Example: Set the "Button Lock Enable".
Spin down the switch
to the page 1
D- P1- 3. "MELODY / VIBRATION MODE" SETTING: Example: set the Vibration mode.
Spin down the switch
to the page 1
Spin down the switch
to the page 2
Spin down the switch
to the page 6
Press the button 1 and it
will display previously
setting
Press the button 2 and it
will display previously
setting
Press the button 3 and it
will display previously
setting
Spin down the switch
to the page 3
Spin down the switch
resume to main page.
Press the button 2 to
change the setting
Press the button 1 to
change the setting
Press the button 2 to
change the setting
7
Spin down the switch
to the page 4
Press the button and
the setting is done.
Press the button and
the setting is done.
Press the button and
the setting is done also
the icon will display
on the OLED screen