Multi-Office-In-One Networking - Zte Alarm Box User Manual

Alarm Box User Manual
2.
3.
4.
5.
6.
Follow-Up
To delete the routing information, run the routeErase [Sequence] command.
Here, sequence indicates the sequence number of the routing information
saved in the flash.

6.3 Multi-Office-in-One Networking

Purpose
Multi-office-in-one means that up to 10 groups of alarm servers can be
connected to an alarm box. The alarm servers may be located in different
network segments. Therefore, remote deployment should be employed in the
multi-office-in-one networking.
601>cfgUdpComm 66 193.232.54.129 3
************************************************************
UdpServer1 Set succeed !!!
************************************************************
Check the routing information saved in the flash.
601>routeFlashShow
Add the necessary route from the alarm box to the router.
601>routeSave 193.232.54.129 192.168.60.100
Check if the routing information is added to the flash successfully.
601>routeFlashShow
***No.*********destination*************gateway*****
1 193.232.54.129
*************************************************
Restart the alarm box. The routing information takes effect.
Telnet the alarm box from the alarm server, and then run the ping
command to check the connectivity between the alarm box and the
server.
192.168.60.100
6-6