Setting The Subnet Mask; Setting The Udp Port - Zte Alarm Box User Manual

Alarm Box User Manual

3.4.2 Setting the Subnet Mask

Purpose
The subnet mask of the alarm box needs to be configured. The default value is
255.0.0.0.
Prerequisites
Steps
1.
2.
3.
4.

3.4.3 Setting the UDP Port

Purpose
The UDP port needs to be configured on the alarm box if the alarm box
interacts with the alarm server through UDP. The default UDP port is 5000.
Prerequisites
3) Press OK to validate the new settings.
The alarm box is connected to the alarm server through the network

cable.
On the alarm box panel, press Menu. The main menu appears on the
LCD screen.
Select Parameter Set > Net Mask Set. The subnet mask setting page
appears.
By default, the subnet mask is 5000.
Use the existing subnet mask
Set a new subnet mask
To use the existing subnet mask, press Cancel to return to the previous
menu.
To set a new subnet mask, follow the steps below:
1) Move the cursor to the subnet mask field to be modified by pressing
◄ or ►.
2) Press ▲ or ▼ to modify the field.
3) Press OK to validate the new settings.
Step 3
Step 4
3-6