Configuring The Local Alarm Box (Udp) - Zte Alarm Box User Manual

Alarm Box User Manual

6.2.2 Configuring the Local Alarm Box (UDP)

Purpose
The local alarm box and the alarm server reside in the same network segment.
If they interact with each other through UDP, you need to configure the UDP
port on the LCD screen. Then configure the UDP connection on the local alarm
box through Telnet, including the IP address of the alarm server and group ID
of the alarm server.
Prerequisites
Steps
1.
2.
The local alarm box is connected to the alarm server or the hub.

UDP port is configured on the alarm server (The default port 5000 is

used in this example). For details, see 3.4.3.
You have telneted the local alarm box from the alarm server. For details,

5.2.
Configure the alarm server 193.232.54.129 in the local alarm box.
601>cfgUdpComm 64 193.232.54.129 1
************************************************************
UdpServer1 Set succeed !!!
************************************************************
View the configurations of the current alarm server.
601>udpCfgShow
************************************************************
***********Sequence 64 :****************
Port = 5000
ServerIp64 = 193.232.54.129
Groupid64=1
Link64State:Active
************************************************************
(UDP Port)
(IP address of the alarm server)
(IP address of the alarm server)
(Link status)
6-4