Icons On The Lcd Screen; Configuring The Alarm Box; Table 3.3-1 Icon Description - Zte Alarm Box User Manual

3.3 Icons on the LCD Screen

Icons on the LCD screen allow users to operate and configure the alarm box.
Table 3.3-1 lists the icons available on the LCD screen.
sound
phone
connection
message
signal

3.4 Configuring the Alarm Box

The IP address, subnet mask, and UDP port of the alarm box can be
configured on the LCD screen. If the alarm box interacts with the alarm server
through TCP, the TCP port should be configured on the alarm server.
Indicator Status
Light on
Note: If the indicator lights off, it indicates that the alarm server is not configured yet.
Name Icon
Alarm
Mobile
Network
Short
Key
Mobile
the alarm server interacts with the alarm box
properly.
Indicates the alarm server is disconnected
from the alarm box.

Table 3.3-1 Icon Description

Indicates whether the alarm box generates
sounds when it receives alarms.
Indicates the working status of the mobile
phone module.
Indicates whether the alarm box is connected
to alarm servers.
Indicates whether the short messages are sent
successfully.
Indicates the direction keys "Up", "Down",
"Left", and "Right".
Indicates the Cancel key.
Indicates the Menu key.
Indicates the OK Key.
Indicates the mobile signal strength.
The first icon consisting of all solid lines
indicates the strongest mobile signal while the
last one indicates the weakest signal.
This icon is displayed only after the mobile
card is inserted into the alarm box.
3-3
Chapter 3 Initial Configuration
Description
Meaning