Figure 2.2-1 Hanging Board - Zte Alarm Box User Manual

Alarm Box User Manual
1.
2.
3.
4.
5.
Hold the hanging board up against the wall and mark the positions of
installation holes. Alternatively, you can draw lines according to the size
shown in Figure 2.2-1.
Drill 4 holes of φ8 at the marked positions, and each hole is 40mm deep.
Hammer lightly the plastic expansion tubes into the holes. Make sure
that the expansion tubes are completely fastened in the holes.
Fix the hanging board on the wall with 4 M5 countersunk head wood
screws, as shown in Figure 2.2-1.
4- 8
1. Φ8 hole 2. Plastic expansion tube 3. Hanging board 4. M5 countersunk head wood screw
Hook the alarm box on to the hanging board, with the hanging holes
exactly matching the hooks of the board. as shown in Figure 2.2-2 and
Figure 2.2-3.
1

Figure 2.2-1 Hanging Board

2-2
2
3
4