Chapter 2 Alarm Box Installation; Introduction; Installing The Alarm Box - Zte Alarm Box User Manual

Chapter 2 Alarm Box Installation

2.1 Introduction

Description
This chapter briefly introduces how to install the alarm box and how to connect
the power cable and the network cable. The alarm box should be placed in a
distinctive location for maintainers' convenience.
The alarm box supports both AC and DC power supplies.
Contents
and Network Cable)
and Network Cable)

2.2 Installing the Alarm Box

Purpose
The alarm box is installed in the control room or in the office. It presents
maintainers with alarms of different severities. The alarm box should be placed
in a distinctive location so that maintainers can easily notice the alarm prompts
or hear the alarm sounds. The following aspects should be taken into
considerations so as to install the alarm box at an appropriate height: the
actual situation of the project site, the length of the power cable, the location of
the AC adaptor, and the location of any other alarm box.
Prerequisites



Steps
Topic
Installing the Alarm Box
Connecting Cables (AC Power Cable
Connecting Cables (DC Power Cable
Tools and instruments are ready.
The installation location of the alarm box is determined.
The hanging board is already uninstalled from the back of the alarm box.
2-1
2.3
2.4
2-1
Section