Setup - CueScript CSF10-SDI Installation And Operation Manual

25 SETUP

25.1 RETURN
Return to Level 1 menu
25.2 FORMAT DISPLAY
⚫
AUTO – Displays detected video format approx. 5 sec.
⚫
ON – Displays detected video format always.
⚫
OFF- Does not display detected video format.
Default value is AUTO.
25.3 TIMECODE
Enables/Disables TIMECODE from SDI signal.
⚫
OFF – Does not display timecode from SDI.
⚫
LTC – Displays LTC from SDI ANC.
⚫
VITC1/VITC2 - Displays VITC1 or VITC2 from SDI ANC.
Default value is OFF.
25.4 USERBIT
Enables/Disables Userbit from SDI
25.5 PICTURE DELAY
⚫
NORMAL – Enables all video enhancement processing for optimum quality.
⚫
FAST – Reduces some video processing for faster picture response.
Default value is NORMAL.
25.6 POWER SAVE
Enables/Disables power consumption control when there is no valid video signal.
⚫
ALWAYS ON – Does not control power saving.
⚫
OTHER – Waits for selected period until it goes to sleep.
Default value is ALWAYS ON.
Wakes up at any key input or valid video input signal.
25.7 KEY LOCK
Prohibits OSD key operation except MENU key.
25.8 BACKLIGHT
Controls backlight at range from 0 to 100%.
Default value is 80%.
25.9 OSD ALPHA
Controls transparency of OSD menu at rage from 0 to 6.
[Opaque] 0 ~ 6 [Transparent]
Default value is 0.
23