Power Requirements; Dimensions; Environmental; Routine Maintenance - CueScript CSF10-SDI Installation And Operation Manual

• HD Component
5

Power Requirements

CueScript CSF10 series prompter monitors are powered with 12 VDC. The maximum power consumed is a
follows:
DC 12V 1.2A (14.4W)
6

Dimensions

Outside Dimensions:
Model CS-10.4: 254 mm W x 208.4 mm H x 38.1 mm D (10" W X 8.205" H X 1.5" D)
Weight: 1.23 kg. 2.7Lb.

7 Environmental

All CueScript CSF10 prompter monitors are designed to be operated within the environment specified
below.
Temperature Range:
Relative Humidity:

8 Routine Maintenance

All CueScript prompter monitors are designed to be operated with limited maintenance. Recommended
maintenance is as follows:
Remove dust from the cabinet when it accumulates. The front LCD panel may cleaned with a soft cotton
cloth. Use only a small amount of mild soap and water solution to dampen the cloth if necessary.
No routine checks or adjustments are required.

9 Installation

9.1 Inspecting New Prompter and Accessories

Each item should be inspected as it is unpacked to see if any damage has occurred in shipping. If so, please
file a claim with the shipping carrier. Please retain the original packaging in the event it is necessary to
reship the unit.
Any missing items should be noted and brought to the attention of the shipper.

9.2 Installation Requirements

The following requirements should be observed when installing a CSF10 prompter.
Operating: 5 to 40 degrees C
Storage: -20 to 60 degrees C
0-95% Non-condensing
7