Canon iR1210 Service Bulletin page 6

MODEL:
LOCATION:
SUBJECT:
Reason :
For manufacturing reasons
Outline :
XD2-1100-242 (RING, E; See 507 in the attachment) prevented coming off of
FC5-0054-000 (SHAFT, REGIST PRESSURE ARM; See 37 in the attachment).
However, the shape of the base part attached to FC5-0054-000 is changed this time,
to prevent FC5-0054-000's coming off instead.
Therefore, XD2-1100-242 is not used with this change.
In addition, the groove of FC5-0054-000 to attach XD2-1100-242 is not used.
Service Parts
FC5-0054-000 with groove is stored.
For the products manufactured before this change, XD2-1100-242 is stored.
NOTE)
In the case that FC5-0054-000 cannot be attached to the base part, remove
XD2-1100-242.
SERVICE BULLETIN
Issued by Canon Europa N.V.
iR1230, iR1270F
ADF ASSEMBLY (2/2)
THE SHAPE OF MEMBER PART CHANGED
Figure 161 of the Parts Catalog (partial)
COPIER
No.: iR1200S-004 Rev. 1
(FF-T01-L6-000056-01)
Date: 22.11.02