CHAPTER 5 MECHANICAL SYSTEM
2.2 PCBs
2.2.1 Removing the Image Processor PCB
1) Remove the rear cover. (See 2.1.1.1)
2) Remove the printer controller PCB. (See
2.2.5)
3) Remove the right cover. (See 2.1.1.2)
4) Remove the screw [1], and detach the
ADF harness cover [2].
5) Remove the 2 harness retainers [3].
6) Remove the screw [4] and disconnect the
grounding wire from the core.
7) Disconnect the 2 connectors (J310/J311)
[5].
5-22A
COPYRIGHT © 2002 CANON INC.
F05-202-01A
[4]
F05-202-01B
2000 2000 2000 2000
CANON iR1200/iR1300 Series REV. 0 AUG. 2002
[1]
[2]
[3]
[5]