Siemens SIMATIC NET ANT793-6MN Operating Instructions Manual page 30

English
Mast mounting
There are two ways of mounting the antenna on a mast:
• a) Direct
To mount the antenna on a mast, use the two securing straps
supplied with the ANT792-8DN (position B in the figure above).
• b) Indirect using the pipe holder with angle bracket
The antenna is mounted with the two securing bands as described
in a), it is, however, not directly mounted on the mast but attached
to the pipe holder (position A in the previous figure).
The antenna is then mounted on the mast with further securing
straps on the mounting plate (position B).
Wall mounting
After mounting the pipe holder with angle bracket (see also mast
mounting b)), the antenna be mounted directly on a wall. The
mounting plate of the antenna has two holes (position C in the figure
above) for wall mounting.
30 Installation Instructions (compact) ANT792-8DN
A5E01116926B-03