Section 1 - Familiarization - Snapper S211, SP211, SPV211, SPV211S, SPV211E Safety Instructions & Operator's Manual

Section 1 - FAMILIARIZATION

BLADE
CONTROL
ROPE START
HANDLE
REAR HEIGHT
ADJUSTMENT
LATCH
RECYCLING
COVER
1.1 INTRODUCTION
This manual has been prepared for the operators of the
SNAPPER 'EASY LINE' WALK BEHIND MOWERS. Its
purpose, aside from recommending operating and rou-
tine service requirements, is to promote safety through
the use of accepted operating practices. Read,
Understand and Follow the "IMPORTANT SAFETY
INSTRUCTIONS" on Pages 2 - 4 of this manual and all
safety messages on the mower and attachments before
operating the mower.
The figures and illustrations in this manual are
provided for reference only and may differ from
your specific model. Contact your Snapper
dealer if you have questions.
GROUND SPEED
CONTROL
(NOT ALL MODELS)
WHEEL DRIVE CONTROL
(NOT ALL MODELS)
FUEL FILLER
CAP
FIGURE 1.1
(MODEL SPV211 SHOWN)
1.2 NOMENCLATURE
The nomenclature drawing above, Figure 1.1, shows
the essential parts of the SNAPPER 'EASY LINE' WALK
BEHIND MOWERS. It is recommended that all opera-
tors of the mower become thoroughly familiar with the
controls, parts and operation of the mower before oper-
ating. Specific details involving the engine are found in
the separate engine owner's manual. Study these man-
uals before operating and keep both handy for future
reference.
6
IMPORTANT
OIL FILL CAP
AND DIPSTICK
ENGINE
PRIMER
FRONT HEIGHT
ADJUSTMENT
LATCHES