Safety Interlock System - Snapper S200KAV2561, S200XK2761 Operator's Manual

S200x series zero-turn riding mower
Table of Contents

Advertisement

Operator Safety

Safety Interlock System

This unit is equipped with safety interlock
switches. These safety systems are
present for your safety, do not attempt to bypass safety
switches, and never tamper with safety devices. Check
their operation regularly.
Operational SAFETY Checks
Test 1 — Engine should NOT crank if:
• PTO switch is engaged, OR
• Parking brake is not engaged, OR
• Motion control handles are not in the NEUTRAL
position.
Test 2 — Engine SHOULD crank if:
• PTO switch is NOT engaged, AND
• Parking brake is engaged, AND
• Motion control handles are locked in the NEUTRAL
position.
Test 3 — Engine should SHUT OFF if:
• Operator rises off seat with PTO engaged, OR
• Operator rises off seat with parking brake disengaged.
• Operator moves motion control handles out of their
neutral positions before disengaging parking brake.
Test 4 — Blade Brake Check
Mower blades and mower drive belt should come to a
complete stop within seven (7) seconds after electric PTO
switch is turned off (or operator rises off seat). If mower
drive belt does not stop within seven (7) seconds, see your
dealer.
NOTE: Once the engine has stopped, PTO switch must be
turned off, parking brake must be engaged, and the motion
control handles must be locked in the NEUTRAL position
after the operator returns to the seat in order to start the
engine.
WARNING
If the unit does not pass a safety test, do not operate
it. See your authorized dealer. Under no
circumstance should you attempt to defeat the purpose
of the safety interlock system.
12
Safety Icons
The alert symbol
is used to identity safety information
about hazards that can result in personal injury. A signal
word (DANGER, WARNING, or CAUTION) is used with the
alert symbol to indicate the likelihood and the potential
severity of the injury. In addition, a hazard icon may be
used to represent the type of hazard. An explanation of
hazard levels and icons are as follows:
DANGER
This indicates a hazard which, if not avoided, will result in
serious injury or death.
WARNING
This indicates a hazard which, if not avoided, could result in
serial injury or death.
CAUTION
This indicates a hazard which, if not avoided, might result in
minor or moderate injury.
CAUTION or NOTICE
These messages presented without the alert symbol indicate
a situation where the unit or property could be damaged.
North American Safety Icons
Safety Icon
Hazard
Alert
Toxic Fumes
Read the
Manual
Open Flame
Hazard
Fire Hazard
Amputation
Rotating
Parts
Amputation
Hand in
Blade
Rollover
Hazard
Safety Icon
Hazard
Amputation
Foot in Blade
Thrown
Objects
Maintain a
Safe
Distance
Keep
Children
Away
Hot Surface
Wear
Protective
Gear
Pinch Point
Overhead
Obstacles
www.SnapperPro.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro 5900664Pro 5900692

Table of Contents