Table of Contents
Advertisement
1 ) Setting the reverse mode
(The display is example.)
[ 1 ] Press the
Back key.
[ 2 ] Press the
[ 3 ] Press the
Enter key to enter the system
setting mode.
[ 4 ] Press the
is displayed.
[ 5 ] Turn the blowout operation mode OFF
using the
Up/Down key, then confirm this
selection by pressing the
[ 6 ] Turn the reverse operation mode ON
the
Up/Down key, then confirm this selection
by pressing the
[ 7 ] End the system setting mode by pressing the
Enter key while
displayed.
27
Up or Down Key to select "SYS".
Enter key several times until
Enter key.
Enter key.
using
is being
Advertisement
Table of Contents
