AND MPA-10 Instruction Manual page 23

Single channel electronic pipette, multi channel electronic pipette
Table of Contents

Advertisement

Operating the multiple dispensing mode
3)
The following example is when dispensing 20μL x 10 times.
[ 7 ] Press the
Enter key to confirm the dispensing
count.
If you would like to change dispensing amount
or dispensing count, press the
before starting aspiration.
When setting, operate from step 4 described
above.
[ 1 ] Put the tip end into the liquid to be dispensed
and press the
pipette to aspirate the liquid
(The example shows 20μL x 10 times
= approx. 200μL)
[ 2 ] Put the tip end into a receiving vessel and press
the
Operation key on the pipette to
dispense the amount for one time.
[ 3 ] In a similar manner, put the tip end into the next
vessel and press the
dispense the liquid.
21
Enter key
Operation key on the
.
Aspirate
Dispense
Operation key to
Dispense

Advertisement

Table of Contents
loading

Related Products for AND MPA-10

This manual is also suitable for:

Mpa-20Mpa-200Mpa-1200Mpa-10000Mpb-200-8Mpb-1200-8

Table of Contents