AND MPA-10 Instruction Manual page 22

When carrying out pre-rinse for multiple dispensing or stopping multiple dispensings,
use the total discharge function. (Refer to "9-8. Total discharge function")
Minimum dispensing amount and maximum dispensing count for multiple dispensing
mode is as follow.
MODEL
MPA-10
MPA-20
MPA-200
MPA-1200
MPA-10000
MPB-200-8
MPB-1200-8
2) Selecting the multiple dispensing mode
Minimum dispensing amount
0.3μL
0.3μL
3μL
15μL
0.1mL
3μL
15μL
(The display is an example.)
[ 1 ] Press the
[ 2 ] Press the
[ 3 ] Press the
dispensing mode (MD).
[ 4 ] Press the
amount for one time.
[ 5 ] Press the
amount for one time.
[ 6 ] Press the
count.
* "Dispensing amount for one time x dispensing
count" can not be set if it exceeds the volume range.
Maximum dispensing count
Back key.
Up or Down key to select "MD".
Enter key to select multiple
Up or Down key to set dispensing
Enter key to confirm dispensing
Up or Down key to set dispensing
20
33 times
66 times
66 times
80 times
99 times
66 times
80 times