Table of Contents
Advertisement
9-4 System setting mode（SYS）
The SYS mode is used to perform or read out pipetting operation settings that suit the
purpose or the liquid to be handled.
2) Operating the system setting mode
[ 3 ] The pipette executes the set count of aspirating-
dispensing cycles while leaving approximately
1/3 of the set mixing volume in the tip.
[ 4 ] Press the
dispense the liquid remaining in the tip.
(When the blowout function is ON (
[ 5 ] One mixing operation is completed once the
aspirated liquid is completely discharged.
When the operation is completed a buzzer
sounds twice.
(The display is example.)
[ 1 ] Press the
24
Dispensing to absorption
Repeat with mixing count
set.
Operation key on the pipette to
Back key.
).)
Advertisement
Table of Contents
