Samsung
SVMi-8 Manual
MMC: 806
DESCRIPTION:
Allows the pre-programming of a slot for a specific card. For example, after the system
is installed and a new card is added, running this program causes the system to rec-
ognise the card. The card will not be assigned in the system numbering plan, so num-
bers for extensions, trunks etc, must be assigned in MMC 724.
The procedure differs slightly for each type of system, as described below.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
CARD PRE-INSTALL
Programming
MMCs