Samsung SVMi-8 Technical Manual page 175

Samsung
SVMi-8 Manual
NOTE: When a group is called, or a caller is transferred to a group, ringback is sent
to the caller. A busy signal will not be returned even if all group members are busy.
Obviously UCD is an exception to this rule.
Calls to a group do not follow the call forwarding instructions of any stations in the
group.
FEATURE KEYS
0 TYPE
1 RING
2 OVERFLOW
3 GRP TRSF
4 WRAP-UP
5 NEXT PORT
6 MEMBER
RING MODES
0 SEQUENTIAL
MMC: 601
Group type (Normal, VM/AA, UCD, AA, CADENCE)
Ring mode (Sequential, distributed or
unconditional)
Overflow time (000 - 250 secs.)
Group transfer time (000 - 250 secs.)
Wrap-up time (timer only valid if Group Type =
UCD)
Overflow port (Any station, common bell
or ring over page)
Group members (e.g., station 202, 225,
231, etc)
The first idle station listed in the group will ring. If the
first is busy, the next idle station will ring.
Programming
MMCs