Kia Soul 2020 Owner's Manual page 482

Maintenance
OSK3078027NR
The LED lamps cannot be replaced
as a single component because it is
an integrated unit. The LED lamps
have to be replaced with the unit.
A skilled technician should check or
repair the side repeater lamp (LED),
for it may damage related parts of
the vehicle.
Replacing stop/tail and turn signal
lamp (bulb type) bulb (Rear combi -
nation lamp Type A)
1. Open the liftgate.
2. Loosen the lamp assembly retain -
ing screws with a screwdriver.
OSK3078054NR
3. Remove the rear combination
lamp assembly from the body of
the vehicle.
4. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
OSK3078033NR
5. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket.
6. Insert a new bulb by inserting it
into the socket and rotating it
until it locks into place.
7. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly and
turning the socket clockwise.
8. Reinstall the lamp assembly to
the body of the vehicle.
Replacing tail/back-up lamp bulb
(Rear combination lamp Type A)
1. Open the liftgate.
2. Remove the service cover assem -
bly to the body of the vehicle.
Light bulbs
7
7 67