Operating Conditions - Kia Soul 2020 Owner's Manual

Driving your vehicle
OSK3058027NR
• If you press the BCW switch while
'Active Assist' or 'Warning Only' is
selected the indicator on the but -
ton will turn off and the system
will deactivate.
• If you press the BCW switch while
the system is canceled the indica -
tor on the button illuminates and
the system activates. In this case,
the system returns to the state
before the vehicle was turned off.
When the system is initially
turned on and when the vehicle is
turned off then on again while the
system is in activation, the warn -
ing light will illuminate for 3 sec -
onds on the outer side view
mirror.
• If the vehicle is turned off then on
again, the system maintains the
last setting.
Blind-Spot Collision Warning
Setting the warning volume of the
Blind-Spot Collision Warning
The driver can select the warning
volume of Blind-Spot Collision
Warning in the User Settings in the
LCD display by selecting
• Go to the 'User Settings → Driver
Assistance → Warning Volume →
High/Medium/Low'.
For more details, refer to "LCD dis -
play" on page 4-51.
NOTICE
If you change the warning volume,
the warning volume of other sys -
tems may change. Always be aware
before changing the warning vol -
ume.

Operating Conditions

The system enters the ready sta -
tus, when 'Active Assist' or 'Warning
Only' is selected and the following
conditions are satisfied:
Active Assist
The Blind-Spot Collision-Avoidance
Assist system will activate when:
• Vehicle speed is between 40 mph
and 110 mph (60 km/h and 180
km/h).
• The system detects both of the
lane lines.
5
5 103