Additional Product Information; Safety Information; Warnings/Cautions/Notes - red lion Sixnet Series Hardware Manual

Cellular rtus
Hide thumbs Also See for Sixnet Series:
Table of Contents

Advertisement

Revised 2015-07-16

Additional Product Information

Additional product information can be obtained by contacting the local sales representative or Red Lion through the
contact numbers and/or e-mail addresses listed on the back of the cover.

Safety Information

Must consult guide in all cases where this symbol is marked.
Environmental:
Warning: The unit may become very hot to the touch in high temperature environments, so extreme caution
should be exercised in handling when energized. The unit should be disconnected from power and allowed to cool
for approximately 5 minutes before touching in high temperature applications.
Pollution degree: 2 (Per IEC 61010-1)
Electrical:
Must be powered by a "Class 2 source" only.
Properly ground the unit before connecting anything else to it. If the equipment is used in a manner "not" speci-
fied by Red Lion, the protection provided by the equipment may be impaired.
Overvoltage category: II (Per IEC 61010-1)

Warnings/Cautions/Notes

Warnings apply to situations where personal injury or death may result.
Cautions apply where damage to equipment may result
Notes apply where additional noteworthy information, not in the general text flow but applicable, is made avail-
able to the user.
Hazardous Location and Installation Requirements
These products should not be used to replace proper safety interlocking. No software-based device (or any other solid-state
device) should ever be designed to be responsible for the maintenance of consequential equipment or personnel safety. In
particular, Red Lion disclaims any responsibility for damages, either direct or consequential, that result from the use of this
equipment in any application.
All power, input and output (I/O) wiring must be in accordance with Class I, Division 2 wiring methods and in accordance with
the authority having jurisdiction.
Suitable for use in Class I, Division 2, Groups A, B, C and D hazardous locations, or non-hazardous locations only.
WARNING – EXPLOSION HAZARD:
Substitution of components may impair suitability for Class 1, Division 2.
RAM 9000 Series Hardware Guide
6

Advertisement

Table of Contents
loading

Table of Contents