red lion Sixnet Series Hardware Manual page 12

Product Overview
Specifications
Warranty
Compliances
*
-40°C to +75°C - See Thermal Performance and Considerations section
Note: All specifications are subject to change. Consult the Red Lion website for more information
RAM 9000 Series Hardware Guide
3 years on design and manufacturing defects
The Red Lion Sixnet Series RAM 9000 products meet the following standards plus others:
Electrical Safety
These devices have been designed to meet the basic safety requirements of the following standards:
•
CE per Low Voltage Directive and IEC 61010-1 (CE applies only to the -EU models. Please contact
Red Lion for availability)
•
UL508 (Industrial control equipment), ANSI/ISA 12.12.01 (Hazardous Locations)
•
CSA C22.2 No. 142 and No. 213 (per cUL)
EMC (emissions and immunity)
•
CE per the EMC directive (CE applies only to the -EU models. Please contact Red Lion for availabil-
ity)
•
IEC 61000-6-2: Immunity in industrial environments
•
IEC 61000-6-4: Emmissions in industrial environments
•
FCC part 15 and ICES 003. See FCC statement on page 6.
•
EN 55022 (CISPR22)
This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy; and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference to radio communications, in
which case the user will be required to correct the interference at their own expense. Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Information to the user: If this equipment causes interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: In order to meet FCC emissions limits, this
equipment must be used only with cables that comply with IEEE 802.3. If necessary, the user should
consult the dealer or an experienced radio/television technician for additional suggestions. The user
may find the following booklet prepared by the Federal Communications Commission helpful: "How
to Identify and Resolve Radio-TV Interference Problems". This booklet is available from: U.S. Govern-
ment Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4
WEEE compliance
These devices comply with the WEEE directive. Do not throw away these devices in the standard
trash. Contact Red Lion regarding proper disposal.
RoHS compliance
These devices comply with the RoHS directive and are considered lead and other hazardous sub-
stance free.
in Chapter 2.
Revised 2015-07-16
5-17