Power Specifications And Consumption; Electrical Specifications And Pinout - red lion Sixnet Series Hardware Manual

Product Overview
Specifications

Power Specifications and Consumption

Power Input:
• Range: 8-30 VDC (12 or 24 VDC nominal)
• Power consumption (less DO power):
• Idle: 4W
• Typical: 5 - 6 W
• Maximum: 6 - 14 W (depends on model)
• Power consumption of DO (max. each):
• 30W (1A @ 30 VDC)
• Heat dissipation: 46 BTU/hour max.; 20 BTU/hour typical
Power input to the unit is protected against reverse polarity and over-voltage up to 33VDC. The router's power
consumption is as follows:
Note: Wiring instructions are provided in

Electrical Specifications and Pinout

Discrete Inputs:
• 2 Channels
• Isolated fully differential
• Isolation (channel to channel) = 1 KV
• Voltage range = 8-30 VDC
• Guaranteed ON voltage = 2.8 VDC
• Guaranteed OFF voltage = 2.7 VDC
• Input resistance = 315K Ohms
RAM 9000 Series Hardware Guide
TYPICAL POWER CONSUMPTION (WATTS)
MODEL STANDBY
RAM-99x1 4.0
RAM-97x1 4.0
RAM-96x1 4.0
RAM-9931 4.0
RAM-9731 4.0
RAM-9631 4.0
I/O Wiring section
To meet UL requirements, a "Class 2 Source" power supply is required.
TRANSMITTING TRANSMITTING
MINIMUM MAXIMUM
5.0
5.0
4.6
5.0
5.0
4.6
in Chapter 2 of the Hardware Installation chapter.
Revised 2015-07-16
9.4
9.4
5.5
13.6
13.6
9.7
5-19