Setting direct or reverse operation.
2
You set this parameter in the Initial Setting Level. The parameter is set to reverse operation by
default.
1
Change the parameter with the
Press the
several times to display
orev (OREV).
Change the set value with
the
Keys.
(When finished, press the
to the operation display.)
Simplicity on the Worksite
Ke y.
Initial Setting Level
(Mod e) Key
( Up and Down)
(Level) Key for at least 1 second to return
Solutions Guide for FAQs: E5CC/E5EC
Using PID Control
←orev(OREV): Indicates the
Direct/Reverse Operation parameter.
←Default setting is or-r (OR-R):
Direct operation
or-r (OR-R): Reverse operation (default)
or-d (OR-D): Direct operation
3-3