Anti-Shake Function - LaserLiner Revolution Manual

Hide thumbs Also See for Revolution:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
Horizontal and vertical use
Setting up
• Horizontal: Position the device on a level surface or on a tripod.
• Vertical: unfold centric point (J) and position unit in vertical mode. Pre-
adjust unit with vertical vial (O) and adjusting screws (N). The sensor then
adjusts the unit automatically. The device can be mounted on a construc-
tion tripod by means of the 5/8" thread (K).
Note: If the vertical vial is precisely aligned, the laser is lined up exactly with the
centric point.
• A plumb can easily be raised with the reference/plumb beam.
Tip: When installing dividing walls align the reference beam parallel to
the wall (please refer to picture B on page 2).
• PRESS THE "ON/OFF" SWITCH
• The device levels itself automatically to within a range of ± 4°. During the set-up
phase, the laser flashes and the prism head remains stationary. The operation/battery
indicator is lit up continuously. When levelling is complete, the laser lights up conti-
nuously and rotates at maximum speed.
Attention: If the device has been placed on a surface with too much of a slope (more
than 4°), there is a warning sound, the prism head remains stationary and the laser
starts to flash. The device must then be placed on a more even surface.

Anti-shake function

This function enables you to use the device when it is still in the
set-up phase. The laser will continue to rotate whilst it is being
aligned by the automatic sensor. This makes device set-up easier,
as it enables the laser to be set to a required height by means of a
crank tripod or a wall bracket, for example. It also means that the
laser can be used on vibrating surfaces and in windy conditions.
This function can be used in combination with the single slope
function and all laser modes except adjustment mode, and for both
horizontal and vertical operation. The function is activated via the
anti-shake button: when it is pressed, the anti-shake LED lights up.
IMPORTANT: Precision is adversely affected during the set-up phase.
Revolution / Revolution Green
27
GB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Revolution green

Table of Contents