Sharp FO-2950M User Manual page 69

Telefax
Hide thumbs Also See for FO-2950M:
Table of Contents

Advertisement

Receiving Faxes
Press the RECEPTION MODE key until the
arrow in the display points to the desired
reception mode.
RECEPTION
MODE
FAX mode: The fax machine automatically
answers on the preset number of rings and
receives the incoming document.
TEL mode:
Beep
RECEIVING
TEL/FAX mode: This mode is convenient
for receiving both faxes and voice calls.
When a call comes in, the fax will detect
whether it is a voice call (including manually
dialled fax transmissions), or an
automatically dialled fax.
A.M. mode: Select this mode when an
answering machine is connected to the fax
and the answering machine is turned on.
TEL
FAX
A.M.
01 FEB 10:30
M:00% STAND-BY
TEL
FAX
A.M.
01 FEB 10:30
M:00% STAND-BY
TEL
FAX
A.M.
01 FEB 10:30
M:00% STAND-BY
FAX
TEL
A.M.
01 FEB 10:30
M:00% STAND-BY
START
Quick Reference Guide
Option Settings
1. Press these keys:
2. Press the # key to scroll through the
settings (to scroll backwards, press the *
key).
3. When the desired setting appears, enter
a selection for the setting (see below) by
pressing the number keys.
4. After entering a selection, the subsequent
setting appears. To return to the date and
time display, press:
Settings
FINE RESOLUTION PRIORITY
This option sets the default resolution for
transmitting documents. Press 1 (YES) to
set the default resolution to FINE, or 2 (NO)
to set it to STANDARD.
NUMBER OF RINGS
This sets the number of rings the fax
machine waits before answering an
incoming call in FAX and TEL/FAX
reception modes. Enter a number from 1 to
5.
RECALL INTERVAL
This sets the amount of time your fax will
wait between automatic redials when the
line is busy. Enter 01 for 1 minute, 02 for 2
minutes, etc., up to a maximum of 15
minutes.
RECALL TIMES
This sets the maximum number of times
your fax will automatically redial if the line is
busy. Enter any number from 00 to 10.
TEL/FAX REMOTE NUMBER
This sets the number that you can press on
an extension phone (followed by **) to
activate fax reception. Enter any number
from 1 to 9.
FUNCTION
4
STOP
65

Advertisement

Table of Contents
loading

Table of Contents