PBX Settings
If the fax machine is connected to a PBX, you must set it for PBX
operation. Press the keys on the operation panel as follows:
1
Press these keys:
The display will show:
PBX CONNECTION
1=YES, 2=NO
2
Press 1 (YES) if the machine is
connected to a PBX. Press 2 (NO) if it
is connected to a regular public line.
3
Set the mode for connecting calls
from the PBX to an outside line. Enter
1 for EARTH, 2 for FLASH, or 3 for
ID. (Refer to your PBX manual or
consult your supplier for the correct
setting.)
• If you selected EARTH or FLASH, go
directly to Step 6.
FUNCTION
4
PBX Settings
YES
NO
1
2
or
EARTH:
1
2
FLASH:
ID:
3
105