1 Introduzione - Introduction
INTRODUZIONE / INTRODUCTION
DESCRIZIONE:
Il PLUS300 EXPERT è un quadro di controllo per impianti
frigoriferi con compressore o per il solo controllo della
unità evaporante pensati per la gestione completa della
cella con integrata la funzione Datalogger. Esso risulta
conforme al regolamento (CE) 37/2005 e relativa norma
EN 12830, alle direttive 89/108/CEE, 92/2/CEE e ai
decreti legislativi italiani n.110 del 27/01/92 e n.493 del
25/09/95 che obbligano a registrare la temperatura dei
surgelati e conservare i relativi dati per almeno un anno.
Il PLUS300 EXPERT permette la gestione completa di tutti
i
componenti
presenti
visualizzare direttamente sul display le registrazioni di
temperatura effettuate e per mezzo di una scheda Secure
Digital trasferire i dati memorizzati nello strumento sul
programma TeleNET col quale organizzare, consultare e
stampare grafici in maniera molto semplice.
CARATTERISTICHE PRINCIPALI:
-
Gestione diretta di compressore, resistenze di
sbrinamento,
ventilatori del condensatore, resistenza olio
compressore e luce cella.
Protezioni magnetotermiche e salvamotore per
-
compressore accessibili a fronte quadro.
Funzione datalogger con registrazione fino ad 1
-
anno della temperatura ambiente e relativi
allarmi.
Designazione
12830, S, A, 1, campo di misura: -45T+45 C°.
-
Scarico dati su scheda di memoria secure digital
Circuito autonomo del datalogger come prescritto
-
dalla normativa EN 12830.
Elettronica di controllo con ampio display LCD
-
retroilluminato e tastiera di semplice utilizzo.
Visualizzazione simultanea su display LCD della
-
temperatura ambiente, temperatura evaporatore,
calendario e stato dell'impianto.
Relè ausiliario con attivazione configurabile da
-
parametro.
Possibilità di realizzare sbrinamenti in real time
-
clock
RS485
per
la
-
supervisione industriale TeleNET
-
Gestione temperatura con punto decimale.
Programma
-
gratuitamente dal sito internet www.pego.it per
l'archiviazione e consultazione del dati scaricati
con la secure digital dai quadri PLUS300 Expert.
Rev. 01-16
GENERALITA' - GENERAL
su
un
impianto
frigorifero,
ventilatori
dell'evaporatore,
dello
strumento:
connessione
alla
rete
TeleNET-SD
scaricabile
MANUALE D'USO E MANUTENZIONE
USE AND MAINTENANCE MANUAL
PLUS300 EXPERT
DESCRIPTION:
The PLUS300 EXPERT is a control unit for refrigeration
systems with three-phase compressor or to control only
the three-phase evaporating unit, for the complete
management of the room. It features the Datalogger
function. It complies with EC standard 37/2005 and the
relative EN 12830 standard, EC directives 89/108, 92/2
and Italian law decrees n.11 of 27/01/92 and n.493 of
25/09/95, which require that frozen food temperatures be
recorded and that such data be stored for at least one
year.
The
PLUS300
management of all the components on a refrigeration
system and shows temperature recordings directly on the
display; such recording are made by way of a Secure
Digital (SD) card and the data saved on the device can be
transferred on the TeleNET programme to organize,
consult and print graphics easily.
MAIN CHARACTERISTICS:
-
Direct
control
elements, evaporator fans, condenser fans,
compressor oli heater, room light..
-
Magnetothermic protection and motor circuit
breaker for the compressor accessible from the
front panel.
Datalogger function with up to 1 year of cold
-
room temperature and relevant alarm recordings.
EN
Instrument designation: EN 12830, S, A, 1,
measuring range: -45T +45 C°
-
Data download into secure digital memory card
Independent datalogger circuit as per EN 12830
-
-
Control electronics with large backlit LCD display
and user-friendly keypad.
-
Simultaneous display on the LCD of cold room
temperature, evaporator temperature, calendar
and system status.
Auxiliary
-
activation.
-
Defrosting can be carried out in real time clock
mode.
-
RS485 for connection to the TeleNET industrial
di
supervision network
Temperature control to 0.1 °C.
-
-
The
TeleNET-SD
downloaded free of charge from www.pego.it to
allow
storage
downloaded with the secure digital card from
PLUS300 Expert panels.
allows
comprehensive
EXPERT
of
compressor,
relay
with
parameter-configured
programme
and
consultation
Pag. 5
1.1
defrosting
can
be
of
data
Need help?
Do you have a question about the PLUS300 Expert VD 4 and is the answer not in the manual?