Hitachi Compute Blade 500 Series Function Manual page 85

11. Check the IP address value. The default setting is [Get Automatically]. When
using the fixed IP address, change the setting.
When changing IP address values, make sure to check the connection.
12. Repeat the procedure, from step 10 to step 11, to set all necessary VLANs.
13. Make sure to reboot the OS
14. Then the Tag VLAN function is Enabled.
You can find the status of a LAN device in which Tag VLAN has been configured,
in system logs of the event viewer.
An error event log related to the LAN driver and this redundancy tools may be
generated in the system or application logs when setting tag VLANs. The LAN
device may link down.
On the [Device Manager] screen, right-click the LAN device in which Tag
VLAN has been configured, and select [Properties] from the menu. Click the
[Link Speed] tab, find [Link Status], and check if the LAN device is running
properly.
When using a team (AFT, ALB, SFT) that the Tag VLAN is set to, the link
connection to the team is not displayed as if the team is not connected. There
is no problem in operation. Check if LAN devices in the team where Tag VLAN
is configured operate properly.
Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
LAN Advanced Functions 2-67