Hitachi Compute Blade 500 Series Function Manual page 35

A team is added to [Device Manager] as shown in the figure below.
After setting advanced LAN functions, double-click [Networking and Sharing
Center] from [Control Panel]. Browse [Network Connection Management].
Confirm that one [Local area Connection] is added.
After setting teams, such as AFT, ALB, and SFT, on a network adapter,
communication cannot be executed properly with the adapter whose settings
are changed. Find the network adapter with [Device Manager]. If [!] is added
to the network adapter, reboot the OS to use it.
Two of the same team names may be displayed in the [Network Connection]
screen immediately after the setting. Update the display after a while, and it
will be properly displayed.
9. When setting priorities, follow the procedure described in
Priorities: Primary/Secondary" to set the Primary LAN device.
10. When setting an ALB team, disable "Receive Load Balancing" by following the
procedure described in
11. When setting AFT/ALB/SFT teams, follow the procedure in "
How to Change Activation
Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
"How to Disable [Receive Load
" to change the activation delay setting.
Delay
LAN Advanced Functions
"How to Set LAN Device
Balancing]".
2-17