Hitachi Compute Blade 500 Series Function Manual page 66

A team is added to [Device Manager] as shown in the figure below.
After setting advanced LAN functions, click [Control Panel] > [Network and
Internet] > [View network status and tasks] to display [Networking and Sharing
Center]. In [Networking and Sharing Center], click [Change adapter settings] to
open [Network Connections]. Check if one [Local area Connection] is added.
10. When setting priorities, refer to How to Set Priority to LAN Device:
Primary/Secondary.
11. When setting an ALB team, disable [Receive Load Balancing] referring to How to
Disable [Receive Load Balancing].
12. When setting AFT/ALB/SFT teams, refer to How to Change Activation Delay to
change settings.
13. When you need the ARP monitoring in setting an SFT team with Intel(R) PROSet
15.8.76.0, perform How to Set Connection Monitoring.
14. When creating another team, repeat step 3 through 12.
2-48
Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
LAN Advanced Functions