Hitachi Compute Blade 500 Series Function Manual page 88

Event Log Description (Source: iANS Miniport)
OS event logs give you information on the status of advanced LAN functions.
The following table describes events logged at iANS Miniport.
ID
6 (I) Primary adapter is initialized: <member
description>
7 (I) Adapter is initialized: <member
description>
8 (I) Team #<team ID>: Team is initialized.
9 (I) Team #<ID>: Virtual Adapter for
<VLAN name> [VID=<VLAN ID>]
initialized.
10 (I) Current Primary Adapter is switching
from: <member description>
11 (W) Adapter link down: <member
description>
12 (I) Secondary Adapter took over:
<member description>
13 (W) The <member description> has been
deactivated from the team.
14 (I) Secondary Adapter has rejoined the
Team: <member description>
15 (I) Adapter link up: <member description>
16 (W) Team #<ID>: The last adapter has lost
link. Network connection has been lost.
17 (I) Team #<ID>: An adapter has re-
established link. Network connection
has been restored.
18 (I) Preferred primary adapter has been
detected: <member description>
19 (I) Preferred Secondary Adapter has been
detected: <member description>
20 (I) Preferred primary adapter took over:
<member description>
21(I) Preferred secondary adapter took over:
<member description>
22 (W) Primary Adapter does not sense any
Probes: <member description>
35 (W) Initializing Team #<ID> with <missing
#> missing adapters. Check the
configuration to verify that all the
adapters are present and functioning.
37 (I) Virtual adapter for <VLAN name>
[VID=<VLAN ID>] removed from team
#<team ID>.
38 (I) Adapter removed from team #<ID>.
2-70
Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
Message
LAN Advanced Functions
(I: Information; W: Warning)
Description and Resolution
The member LAN device as Primary Adapter has
been properly initialized.
The member LAN device as Secondary Adapter
or as another adapter but Primary has been
properly initialized.
The team comprising advanced functions has
been properly initialized.
VLAN has been properly initialized.
Current Primary Adapter is switching from the
member adapter to a member as Secondary
Adapter.
The member adapter link is down. Check cable
connections.
Due to failure in the LAN device as Primary
Adapter, a member adapter as Secondary
Adapter has taken over the network processing.
The member adapter has been deactivated from
the team. There is a problem in Primary device,
Secondary device, or the connecting route.
The deactivated member LAN device has been
added to the team again.
The member LAN device link is up again.
All LAN devices in the team have lost link.
Network connection in the LAN device team has
been restored.
The member LAN device specified as Primary
adapter has been detected.
The member LAN device as specified Secondary
adapter has been detected.
The member LAN device specified as Primary
adapter has taken over the network processing.
The member LAN device specified as Secondary
adapter has taken over the network processing.
The member LAN device as Primary Adapter
does not sense any probe packets.
Possible reason: partitioned Team.
The team # is being initialized with missing or
inactive adapters#. Check if all LAN devices are
properly implemented and functioning.
Virtual adapter with VLAN name [VID=VLAN ID]
has been removed from the team.
The LAN device has been removed from the
team.