Hitachi Compute Blade 500 Series Function Manual page 55

4. Make sure to reboot the OS.
When removing Tag VLAN, error events related to the LAN driver and this fault
tolerance tool may be recorded in the event log, such as system and
application logs. The LAN device may link down.
On the [Device Manager] screen, right-click the LAN device in which Tag VLAN
has been configured, and select [Properties] from the menu. Click the [Link
Speed] tab, find [Link Status], and check if the LAN device is running properly.
When removing Tag VLAN, the following popup screen saying "NCS2Prov
Module has stopped working" may appear and "Application Error" generated in
"NCS2Prov.exe" may be recorded in application logs. When the popup screen
appears, select [Close].
Confirm that the Tag VLAN is removed in [Device Manager] and check that
communication can be properly done via the adapter that Tag VLAN was set to.
If the Tag VLAN is not removed, back to step 1 and remove it again through
step 4. Then check that communication can be done properly via the LAN
adapter that Tag VLAN was set to.
When a team is removed with Windows Server 2008 32-bit, the following error
may be recorded in the event log.
Source: srv
Event ID: 2019
Level: Error
Description: The server was unable to allocate from the system nonpaged pool
because the pool was empty.
Check whether or not the resource is short when this error event is recorded.
LAN Advanced Functions 2-37
Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)