Hitachi Compute Blade 500 Series Function Manual page 53

7. Repeat steps from 3 to 6 as many times as the number of network adapters to
set VLAN to.
8. Reboot the system, and the Tag VLAN function is Enabled.
You can find the status of the LAN device in which Tag VLAN has been configured,
in the system logs of the event viewer.
On the [Network Connection] screen, [Local Area Connection] icons that
include an equivalent number of icons to the LAN devices, and a equivalent
number of [Local Area Connection] icons to Tag VLANs are set in the
Advanced LAN settings.
"Intel(R)xxxxx – VLAN: VLANx" is shown in [How to connect:].
Two of the same team names may be displayed in the [Network Connection]
screen immediately after setting VLAN. Update the display after a while, and
it is properly displayed.
An error event log related to the LAN driver or this fault tolerance tool may be
registered in the event log, such as the system or application log, while
setting the tag VLAN. The LAN device may link down.
On the [Device Manager] screen, right-click the LAN device in which Tag
VLAN has been configured, and select [Properties] from the menu. Click the
[Link Speed] tab, find [Link Status], and check if the LAN device is running
properly.
When using a team (AFT, ALB, SFT) that the Tag VLAN is set to, link
connection to the team is not displayed as if the team is not connected. There
is no problem in operation. Check if LAN devices in the team that Tag VLAN is
configured operate properly.
Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
LAN Advanced Functions 2-35