Panasonic VDR-D150GC Operating Instructions Manual page 177

LSQT1049(ENG).book 177 ページ ２００５年１２月２０日 火曜日 午後６時４５分
Playing back motion pictures by date
Recorded scenes are grouped by date on this unit.
Scenes recorded on the same day can be played back in succession.
1 Press the MENU button, then select
PLAY SETUP] # [
[
and press the joystick.
≥ When [PLAY MODE] is set to [VIEW ALL], all recorded motion
pictures will be played back in succession. ([
2 Select the date for playback, then press the joystick.
The scenes recorded on the same day are displayed as thumbnails.
3 Select the scene to be played back.
≥ Even if scenes are recorded on the same day, they are grouped separately in the following cases.
– When the number of scenes exceeds 99 (RAM) (-RW‹VR›) (-RW‹V›) (-R)
– When the disc is removed (-RW‹V›) (-R)
– When the disc is repaired (-RW‹V›) (-R)
– When the mode dial is switched (-R)
– When the power is turned off (-R)
Resuming the previous playback
Press the MENU button, then select [
# [ RESUME PLAY] # [ON] and press the joystick.
If playback of a motion picture is stopped, [R] appears on the thumbnail
view of the stopped scene.
≥ If playback is stopped at any point during a motion picture while
[RESUME PLAY] is set to [OFF], the next time the motion picture is
played back, it will be from the beginning.
≥ The resume position memorized is cleared if the
unit is turned off, but the menu setting is not
cleared.
PLAY MODE] # [BY DATE]
ALL] is displayed.)
PLAY SETUP]
Motion picture playback
177
LSQT1049